Table Of Content
What is Stainless Steel 304H Instrumentation Valves
Specification of ASTM A276 304H SS Instrumentation Valves
ANSI B16.34 Available Types of SS 304H Instrumentation Valves
Stainless Steel 304H Ball Valves Equivalent Grades
ASTM A276 304H Needle Valves Chemical Composition
SS 304H Check Valves Mechanical Properties
Types of Stainless Steel 304H Instrumentation Valves
Manufacturing Standards of Steel 304H Instrumentation Valves
Astec Tubes need no introduction as a manufacturer and supplier of SS 304H instrumentation valves. We have been a part of this industry for years. And we have been serving a wide range of industrial clients with superior quality products.
These valves have an astonishing surface finish and sound mechanical properties and with this, these are known to be chemically balanced. These valves come with a high content of Chromium and with that these valves are known to have a considerable amount of Nickel. It gives them effective corrosion resistance ability. These grades of stainless steel are not only versatile but also widely used. Our valves are known for showcasing excellent machining ability.
These valves are compatible with welding if required and known for welding ability characteristics even in absence additional filler metals. This variety of valves is suitable for marine and under seawater operations.
These valves portray effective resistance in high-level oxidizing conditions. It is because of the exposure of their alloying components to the atmosphere. These valves have a high level of mechanical and tensile strength. They are sturdy and tough because while manufacturing they are exposed to elevated temperatures.
These valves perform equally well even if they get heated in an application that involves very high temperatures. Stainless steel alloys offer greater cryogenic toughness than other alloys. SS 304 L has a higher work hardening rate than its counterparts. This is one of the most fundamental reasons behind increased strength and hardness in the valves of this alloy. These are ductile and due to the presence of a considerable amount of chromium, these shine from outside. This shine over the outer surface gives these valves a good appearance.
They found extensive application in many medium and high intensive industries. These include culinary uses, manufacturing kitchen sinks. Apart from that the surgical instrument industry also requires these. Automobile and aerospace industries use these valves in manufacturing many products. In addition to that these valves are extensively used in oil exploration, gas transportation, and many other petrochemical and refrigeration applications. These valves are cost-effective and suit the pocket of both small and medium-sized industrial and commercial clients.
Stainless Steel 304H Ball Valve
Stainless Steel 304H Needle Valve
Stainless Steel 304H Check Valve
Stainless Steel 304H Cryogenic Globe Valve
Stainless Steel 304H Cryogenic Gate Valve
Stainless Steel 304H Relief Valve
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| SS 304H | S30409 | 1.4301 | - | - | - | - | - |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304H | 0.10 max | 2.0 max | 0.75 max | 0.045 max | 0.03 max | 18 – 20 | - | 8 – 10.5 | - |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 304H | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 | 40 % |
UNS S30409 Solenoid Instrument Valve Manifold
SS 304H Integral-Bonnet Instrument Needle Valves
SS 304H Two piece Instrument Ball Valves
1.4301 Instrument Trunnion Ball Valves
ANSI B16.34 SS 304H DBB Valve
SS 304H Metering Valve Exporter
SS 1.4301 Instrumentation Valves Dealer
Stainless Steel S30409 Instrumentation Valves
UNS S30409 Bellows-sealed Valves
SS 1.4301 Fluid Line Stop Valves
SS 304H Cryogenic Safety Relief Valves Supplier
SUS 304H O-Ring Poppet Valve
UNS S30409 3-Way Manifold Valves
Stainless Steel 304H Rising Plug Valves
ASME SA 276 SS 304H In-Line Gauge Isolator Valves
1.4301 In-line Push-to-Read Gauge Isolator Valve
UNS S30409 Metering Valves
SS 304H Non Return Check Valve Manufacturer
Stainless Steel 304H Mini Needle Valves
SS 304H Pendulum Valves Stockist
SUS 304H Instrumentation Valves Stockholder
ASTM A276 SS 304H Wellhead Bleed and Gauge Valve
SS 304H Sequence Control Valves
ANSI 304H SS Fluid Control Ball Float Valve
| ASME B16.34 | show the max allowed pressure for a material depending on the product rating and the process temperature (the higher the temperature, the lower the pressure at a given rating). | 304H SS Two piece Instrument Ball Valve, SS 304H Instrument High Pressure Ball Valve, 304H Stainless Steel Instrument Trunnion Ball Valve, 304H Steel Trunnion double block bleed Ball Valves, SS 304H Check Diaphragm Valves, Stainless Steel 304H Angle Type Instrument Globe Valves, Bolted-Bonnet Instrument Gate Valve, Instrument Double Block Bleed Valves, SS 304H Monoflange Butterfly Valves |
ASTM A276 304H SS Instrumentation Valves
Standard : ASTM A276, A351 / ASME SA276, SA351
Temperature Rating : PTFE 450F,(232C)/ Grafoil 700 F(371C)
End Connection : Male and Female NPT, BSPT, Socket Weld (SW) or Dual Ferrule Tube Connections, Male to Female
Flow Pattern : Straight/ Angle
Connection : Thread, Weld or Tube End.