Specification of ASTM B366 Inconel Pipe Fittings
Available Types of Inconel Pipe Fittings
Types of Inconel Buttweld Fittings
We are proud to say that, Astec Tubes is the best manufacturer and supplier of Inconel/Incoloy Pipe Fittings. We provide these Inconel/Incoloy pipes fittings in different ranges and different grades to our clients. We make sure that these Inconel pipe fitting is made with quality standards and tested before we provide to our clients.
Inconel belongs to the family of austenitic chromium-nickel which is a superalloy. These are well suited for extreme environments due to corrosion and oxidation resistance materials subjected to heat and high pressure. While heating they formed a thick layer of oxide that protects the surface from the further attack of chemicals. Due to the wide range of temperatures, these Inconel tubes reeducate strength and attractive offer high-temperature applications where thermally crystal vacancies would yield to creep of steel and aluminum. Incoloy is designed for excellent corrosion resistance and they are mostly nickel-based. These offer high strength at high temperatures and there is a specific alloy present which protects from particular chemical attacks. This Incoloy alloy comes in different variety of grades which you can choose from. These are excellent choices in the oil and gas industries due to its excellent resistance to seawater, brine, sour gas and high chloride environments.
Inconel alloys include Inconel 600, 601, 617, 625, 718, etc. which are used for many purposes such as Inconel is used for commercial purposes in aerospace and gas turbines application. The heating industries and processing industries uses Inconel 230 alloy plate and sheet. Incoloy alloys are can be classified as, Incoloy 800HT, 825, 800H, 925.
These Inconel/Incoloy Pipe fittings are used in many applications in the automobile industry, aerospace industry, etc. Different types of Inconel/Incoloy Pipe fitting in use are Reducing Elbow, short radius elbow, long radius elbow, 45 degree elbow, 90 degree elbow, swage reducer and pipe caps. Material testing is done on these Inconel/Incoloy Pipes Fitting before we deliver to our clients and all the test certificates are included with the following documentation. We include Raw material Certificate, EN 10204/3.1B, 100% Radiography Test report and other third party inspection reports. We deliver these products on time and with safety assurance.
Inconel Butt weld Elbow
Inconel Butt weld Tee
Inconel Butt weld Cross
Inconel Butt weld Reducer
Inconel Butt weld Stub End
Inconel Butt weld Pipe Bend
Incoloy Buttweld Elbow
Inconel Pipe Elbow
Inconel Equal Tee
Inconel Butt weld Cross
ANSI B16.9 Inconel Welded Elbow
Inconel Reducer Exporter
Incoloy Pipe Fittings
Inconel Eccentric Reducer
Inconel Concentric Reducer
Inconel Pipe Cap Supplier
Inconel Buttweld End Cap
Incoloy Butt weld Fittings
Inconel Long Stub End
ASME SB366 Inconel Buttweld Bend
Inconel Short Stub End Manufacturer
Inconel Pipe Bend
Inconel 90 deg. Elbow Stockist
Inconel Pipe Fittings Stockholder
ASTM B366 Inconel Welded Fittings
Inconel Seamless Fittings
Inconel Alloy Pipe Fittings
ASME B16.9 | Factory-Made Wrought Buttwelding Fittings | Inconel Long Radius Elbows, Long Radius Reducing Elbows, Inconel Long Radius Returns, Incoloy Short Radius Elbows, Inconel Short Radius 180-deg Rerurns, Inconel 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Inconel Lap Joint Stub Ends, Inconel Caps, Reducers |
ASME B16.28 | Inconel Short Radius Elbows, Inconel Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Inconel Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, Inconel caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Inconel Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, Inconel reducers |
ASTM B366 Inconel Pipe Fittings
Standard :ASTM B366 / ASME SB366
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom