What is Stainless Steel Pipe Fittings
Specification of ASTM A403 SS Pipe Fittings
Available Types of Stainless Steel Pipe Fittings
Types of Stainless Steel Buttweld Fittings
Astec Tubes is an acknowledged manufacturer and supplier of stainless steel products. We offer SS Pipe Fittings to the clients according to their demands. We are capable of manufacturing fittings in different dimensions and specifications. Pipe fittings are vital components of a piping industry where they are used to provide a directional change in the flow of fluid. However, this change could be required at different angles. Henceforth, varieties of fittings are used. For example, fittings like tee are used to provide a 90-degree change to the fluid. Elbow fittings are available in two angles where it can give either a 45-degree change or 90-degree change to a fluid. A long radius bend offers a smooth directional change without much pressure drop.
On the other hand, reducing Stainless Steel Pipe Fittings provide a size reduction to the pipe in addition to the change in the fluid. A four-way pipe fitting called cross is not used for transporting fluid but often used in a water sprinkler line. And to reduce the size of the pipe, either concentric or eccentric reducers are used. Pipe caps are also a type of pipe fittings that provide a dead end to the piping system.
Stainless steel is considered a good material to manufacture SS Butt weld Fittings. These are known as inox or inox steel which contains carbon 1.2 percent and chromium 11 percent by mass. These are notable material for getting exceptional corrosion resistance. The resistance is often required when working in reducing acids and chloride solutions. It can resist acids, organics, and bases to prevent uniform, localized, galvanic, and stress corrosion cracking. It is an ideal material to manufacture pipe fittings because of low maintenance and no need for surface coatings.
Henceforth, SS pipe fittings found application in various industries such as oil and gas, process instrumentation, pulp and paper, sanitation, irrigation, power, municipal, petrochemical, marine and dredging, ventilation, residential, road and highway construction, and more. These industries use them for transferring solids, fluids, liquids, gas, and slurries. Moreover, they are used for protecting other sensitive equipment of the piping system from high pressures and extreme weather situations.
Stainless Steel Butt weld Elbow
Stainless Steel Butt weld Tee
Stainless Steel Butt weld Cross
Stainless Steel Butt weld Reducer
Stainless Steel Butt weld Stub End
Stainless Steel Butt weld Pipe Bend
Stainless Steel Buttweld Elbow
Stainless Steel Pipe Elbow
Stainless Steel Equal Tee
SS Butt weld Cross
ANSI B16.9 SS Welded Elbow
Stainless Steel Reducer Exporter
SS Pipe Fittings
Stainless Steel Pipe Fittings
Stainless Steel Eccentric Reducer
SS Concentric Reducer
SS Pipe Cap Supplier
Stainless Steel Buttweld End Cap
Stainless Steel Butt weld Fittings
Stainless Steel Long Stub End
ASME SA 403 SS Buttweld Bend
SS Butt weld Fittings
Stainless Pipe Fittings
SS Short Stub End Manufacturer
Stainless Steel Pipe Bend
SS 90 deg. Elbow Stockist
SS Pipe Fittings Stockholder
ASTM A403 SS Welded Fittings
Stainless Steel Seamless Fittings
ANSI B16.9 Stainless Steel Pipe Fittings
ASME B16.9 | Factory-Made Wrought Buttwelding Fittings | SS Long Radius Elbows, Long Radius Reducing Elbows, Stainless Long Radius Returns, Steel Short Radius Elbows, SS Short Radius 180-deg Rerurns, Stainless Steel 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, SS Lap Joint Stub Ends, Stainless Steel Caps, Reducers |
ASME B16.28 | SS Short Radius Elbows, SS Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | SS Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, Stainless Steel caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Stainless Steel Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, SS reducers |
ASTM A403 SS Pipe Fittings
Standard : ASTM A403 / ASME SA403
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom