Specification of ASTM B366 Monel Pipe Fittings
Available Types of Monel Pipe Fittings
Types of Monel Buttweld Fittings
Astec Tubes is the leading manufacturer and supplier of stainless steel and carbon steel products across the world. We also provide Monel pipes and products, which is a highly useful product in the field of engineering industries. We have different categories of these products like Monel alloy 400 and alloy k500 pipes. We have sufficient stoke of these products so that we can provide them to our customers easily. We have many categories of Monel pipes that can be used in Monel Pipe Fittings. Monel Pipe fittings are piping components that help in changing the direction of flow and also provide the facilities to increase or decrease the speed of flow. Pipe fittings also help in controlling the flow speed and directions. There are various types of pipe fittings are available such as elbow, tee, reducer, union, cross cap and many more. Elbow and coupling is used to connect pipe of same and different diameter. On the other hand, some fittings are used to connect the broken pipes as well. these broken pipes thus have secure connection where in fluid inside the pipe can easily transport to its destination without leakage.
This alloy is nickel copper alloy and generally used in mildly oxidizing environments. Monel Butt weld Fittings can be used in many work and industries, power generation, gas processing, specialty chemicals, heat exchangers, condensers and pulp and paper industries. Monel alloy is a good corrosion resistance in reducing the environment but poor in oxidizing conditions. Monel alloys are magnetic at room temperature and resistance to sea water. These alloys can’t be used for acidic industries because of their low oxidizing conditions. Monel pipes have a high strength over high temperature range that makes it more demandable than other products.
Monel Pipe Fittings are widely used in the marine industries as well as in oil and gas industries. To provide the best product and enhance the quality of our product we provide many different testing to our products such as hardness test, chemical analysis, flattening test, micro, and macro test, pitting resistance test, and intergranular test. These tests ensure the quality and workability’s of the products.
Monel Butt weld Elbow
Monel Butt weld Tee
Monel Butt weld Cross
Monel Butt weld Reducer
Monel Butt weld Stub End
Monel Butt weld Pipe Bend
Monel Buttweld Elbow
Monel Pipe Elbow
Monel Equal Tee
Monel Butt weld Cross
ANSI B16.9 Monel Welded Elbow
Monel Reducer Exporter
Monel butt weld Pipe Fittings
Monel Eccentric Reducer
Monel Concentric Reducer
Monel Pipe Cap Supplier
Monel Buttweld End Cap
Monel Long Stub End
ASME SB366 Monel Buttweld Bend
Monel Butt weld Fittings
Monel Short Stub End Manufacturer
Monel Pipe Bend
Monel 90 deg. Elbow Stockist
Monel Pipe Fittings Stockholder
ASTM B366 Monel Welded Fittings
Monel Seamless Fittings
Monel Alloy Pipe Fittings
ASME B16.9 | Factory-Made Wrought Buttwelding Fittings | Monel Long Radius Elbows, Long Radius Reducing Elbows, Monel Long Radius Returns, Monel Short Radius Elbows, Monel Short Radius 180-deg Rerurns, Monel 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Monel Lap Joint Stub Ends, Monel Caps, Reducers |
ASME B16.28 | Monel Short Radius Elbows, Monel Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Monel Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, Monel caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Monel Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, Monel reducers |
ASTM B366 Monel Pipe Fittings
Standard :ASTM B366 / ASME SB366
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom