What is Copper Nickel Pipe Fittings
Specification of ASTM B466 Copper Nickel Pipe Fittings
Available Types of Copper Nickel Pipe Fittings
Types of Copper Nickel Pipe Buttweld Fittings
Table Of Content
Astec Tubes provide Cupro Nickel Pipe Fittings of high quality to the clients on their demands. We manufacture them as per the guidelines of international standards. These are supply to the clients as well on their demand and requirements. Pipe fittings serve major function to connect multiple pipes. However, the size and diameter of these pipes may vary but the fittings are designed in a way that they connect any pipe of different sizes. Their main purpose is to maintain the right amount of flow within the pipe. Moreover, they are used to prevent leakage from the pipe as they contain toxic substances and leakage will cause an enormous amount of damage to life and property. Several different kinds of fitting serve this purpose. These are unions, adapter, elbow, plug, reducer, cross-type, couplings, cap, and valve. The fittings provide different directional changes to the pipe.
Elbow is available in three angles like 22.5, 45, and 90. Pipes of the same diameter are connected using elbow whereas others are connected using reducers. Reducer is used when the size of flow has to be changed from larger to smaller. The concentric reducer has a cone shape structure which decreases gradually around the pipe. As result cavitations occurs. On the other hand, cavitations or air accumulation is not possible when eccentric reducers are used. An important fitting of the plumping system is the tee type that has a T shape. This one has two outlets and inlets arranged at an angle. These help in combining the flow from different inlets and outlets to the pipe.
On the other hand, the cross has four directions for connection. The fire sprinkler systems use these types of fittings. And for use in connecting the broken pipe couplings are used. Compression and slip coupling are two commonly used couplings Cu-Ni Pipe Fittings. Gaskets and rubber seals are used to prevent leakage while connecting couplings to the pipes. However, slip couplings are easier to install. A similar fitting to coupling is union. However, the coupling cannot be removed once installed but unions can be removed as it uses nut, and threaded ends for connection.
Copper Nickel Pipe Butt weld Elbow
Copper Nickel Pipe Butt weld Tee
Copper Nickel Pipe Butt weld Cross
Copper Nickel Pipe Butt weld Reducer
Copper Nickel Pipe Butt weld Stub End
Copper Nickel Pipe Butt weld Pipe Bend
Copper Nickel Pipe Buttweld Elbow
Copper Nickel Pipe Elbow
Copper Nickel Equal Tee
Copper Nickel Butt weld Cross
ANSI B16.9 Copper Nickel Welded Elbow
Copper Nickel Pipe Reducer Exporter
Cupro Nickel Pipe Fittings
Copper Nickel Eccentric Reducer
Copper Nickel Concentric Reducer
Copper Nickel Pipe Cap Supplier
Copper Nickel Buttweld End Cap
Cupro Nickel Butt weld Fittings
Copper Nickel Pipe Long Stub End
ASME SB467 Cu-Ni Buttweld Bend
Cu-Ni Short Stub End Manufacturer
Copper Nickel Pipe Bend
Copper Nickel 90 deg. Elbow Stockist
Copper Nickel Pipe Fittings Stockholder
ASTM B467 Cu-Ni Welded Fittings
Copper Nickel Seamless Fittings
Copper Nickel Pipe Fittings
ASME B16.9 | Factory-Made Wrought Buttwelding Fittings | Copper Nickel Pipe Long Radius Elbows, Long Radius Reducing Elbows, Copper Nickel Long Radius Returns, Cu-Ni Short Radius Elbows, Copper Nickel Short Radius 180-deg Rerurns, Copper Nickel Pipe 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Cupro Nickel Lap Joint Stub Ends, Copper Nickel Pipe Caps, Reducers |
ASME B16.28 | Copper Nickel Short Radius Elbows, Copper Nickel Pipe Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Copper Nickel Pipe Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, Copper Nickel Pipe caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Copper Nickel Pipe Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, Copper Nickel Pipe reducers |
ASTM B467 Copper Nickel Pipe Fittings
Standard :ASTM B466, B467
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/2" to 24" NB to 24″NB in
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Schedule : SCH 10, SCH20, SCH30, SCH40
Grades Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640