Stainless Steel 310/310S/310H Fasteners Manufacturer

Stainless Steel 310 Fasteners, Stainless Steel 310 Nuts, SS UNS S31000, S31008, S31009 Fastener Manufacturer, Stainless Steel 1.4841 Fasteners Supplier, ASTM A194 SS 310 Fasteners Exporter, SS 310 Double Hex Bolt Suppliers in Mumbai, India.

Today Astec Tubes are prominent manufacturers, suppliers, stockholders and exporters of Stainless Steel 310/310S/310H Fasteners made using premium quality raw materials as per internationally recognized quality standards. We manufacture these Stainless Steel UNS S31000, S31008, S31009 Fasteners in various types such as nuts, bolts, screws, washers, studs, etc.Stainless steel 310 Fastener is an austenitic heat resistant alloy with phenomenal oxidation resistance from 2000 degrees F under mildly cyclic conditions. Its nickel and high chromium contents have better resistance to corrosion, superior oxidation tolerance and a higher fraction of room temperature strength than standard austenitic alloys such as SS 304. SS 310 Fasteners are commonly used at cryogenic temperatures, with outstanding tolerance to-450 degrees F temperatures, and lower magnetic permeability.

Stainless steel 310S Fastener is austenitic chromium, nickel stainless steel (.08 percent max carbon) with strong resistance to oxidation and high temperature strength. It resists oxidation in continuous service which gave decreasing sulfur gasses up to 2000 degrees F are not present. This is often used for intermittent operation at temperatures up to 1900 degrees F, as it avoids rescaling and has a low expansion coefficient. This aspect decreases the steel's propensity of heat service to warp. Aside from the lower carbon content, 310s are the same as 310s to reduce carbide precipitation during welding.

310H Stainless steel fasteners have a carbon content and are suitable for high temperature applications. 310H SS Fasteners have outstanding oxidation resistance in intermittent operation at temperatures up to 1040 degrees C (1904 degrees F) and in continuous action at 1150 degrees C (2102 degrees F). This is widely used in areas where sulfur dioxide gas is present at high temperatures; but it is advised that this steel fasteners should not be used continuously at a range of 425-860 degrees C (797-1580 degrees F).

Stainless Steel 1.4841, 1.4948, 1.4845 Fasteners, Stainless Steel 310 Bolts, Stainless Steel 310S Nuts Exporter, Stainless Steel 310H Hex Bolts, ASTM A194 SS 310H Screws Manufacturer, SS 310S Stud Bolts Dealer in Mumbai, Stainless Steel 310/310S Industrial Fasteners, SS 310 Industrial Fasteners Manufacturer in India.

SS 1.4841, 1.4845 Fasteners have been used in various sectors and applications such as heat exchangers, radiant tubes, petroleum refining and steam boilers, coal gasified internal parts, food processing equipment, oil and gas industries, and chemical industries. We also supply these stainless steel fasteners at the most reasonable prices, in various sizes, dimensions, thickness & grades according to customer requirements.

Standard : A193 / A194

Thickness : 0.6 mm THK to 6.00 mm THK

Size Range : 1/16” 1/2” & 1.5MM to 38.1MM

Outer Diameter : 6.00 mm to 60.00 mm

Stainless Steel 310/310S/310H Nuts

Stainless Steel 310/310S/310H Nuts

Stainless Steel 310/310S/310H Bolts

Stainless Steel 310/310S/310H Bolts

Stainless Steel 310/310S/310H Screws

Stainless Steel 310/310S/310H Screws

Stainless Steel 310/310S/310H Washers

Stainless Steel 310/310S/310H Washers

Stainless Steel 310/310S/310H Stud Bolts

Stainless Steel 310/310S/310H Stud Bolts

Stainless Steel 310/310S/310H Anchor Bolts

Stainless Steel 310/310S/310H Anchor Bolts

Stainless Steel 310/310S/310H Fasteners Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310H - S31009 - - - -
Have you any question or query
General Queries While Buying 310/310S/310H SS Fasteners

ASTM F594 310/310S/310H Fasteners Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2.0 max 0.15 max 0.020 max 0.015 max 24.00 - 26.00 0.10 max 19.00 - 21.00 54.7 min
SS 310S 0.08 max 2.0 max 1.00 max 0.045 max 0.030 max 24.00 - 26.00 0.75 max 19.00 - 21.00 53.095 min
SS 310H 0.04 – 0.10 2.0 max 1.00 max 0.045 max 0.030 max 24.00 - 26.00 - 19.00 - 21.00 53.885 min

SS 310/310S/310H Fasteners Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Types of Stainless Steel 310/310S/310H Fasteners

Stainless Steel 310/310S/310H Fasteners Applications

  • Petrochemicals
  • Gas Processing
  • Chemical Equipment
  • Off-Shore Oil Drilling Companies
  • Pharmaceutical Equipment
  • Pulp & Paper Industry
  • Sea Water Equipment
  • Power Generation