Table Of Content
What is Titanium Gr.2 Instrumentation Valves
Specification of Titanium Gr-2 Instrumentation Valves
ANSI B16.34 Available Types of Titanium Gr.2 Instrumentation Valves
Ti Alloy Grade 2 Ball Valves Equivalent Grades
Alloy Gr 2 Needle Valves Chemical Composition
Titanium Gr-2 Check Valves Mechanical Properties
Types of Titanium Gr.2 Instrumentation Valves
Manufacturing Standards of Titanium Grade 2 Instrumentation Valves
Astec Tubes are a reliable stockist and distributor of Titanium Gr.2 instrumentation Valves in India and around the globe. This grade will be used for both hot and cold forming. It's planned to be used in the heat management process for improved fatigue strength. Both hot and cold working processes induce this grade. The temperature in the hot working environment does not exceed 920 degrees Celsius. These are machined using the electron beam machining technique. Titanium Grade 2 Instrumentation Valves have a high chromium content and a low nickel content, making them resistant to high temperatures in sulphur-bearing conditions. These Titanium Grade 2 Instrumentation Valves have a low carbon absorption tolerance and are not approved for use in extremely carburizing conditions.
Sharp tooling, low cutting speeds, high feed rates, adequate lubrication, and rigid machine setup are all needed for this grade. With normal welding procedures, this grade is easily formable and durable. Chemicals such as nitric acids, sulphuric acid acids, phosphoric acids, and others will not react with this grade. We consider all parameters when developing these valves to ensure that they are the most robust, efficient, and cost-effective choice for instrumentation valve manufacturing. It improves the efficiency and reliability of instrumentation valves in a variety of applications.
Titanium Gr 2 Instrumentation Valves are used in critical and challenging applications because of their superior corrosion resistance, weldability, and formability properties. This rating is higher than the previous one. This grade is both biocompatible and non-toxic.
We put our products through a range of tests at Astec Tubes, including thermal stability testing, pressure testing, mechanical testing, intergranular corrosion testing, micro testing, ultrasonic testing, chemical testing, radiographic testing, strength testing, and pitting corrosion testing. PMI test, micro test, disruptive test, macro test, and other tests are available.
Titanium Gr 2 Instrumentation Valves are packaged in special packaging that contains wooden frames, crates, plywood cartons, and cases, spiral wound paper coils, and cores on pallets rolled by a thin plastic sheet.
Titanium Gr-2 Ball Valve
Titanium Gr.2 Needle Valve
Titanium Gr 2 Check Valve
Titanium Grade 2 Cryogenic Globe Valve
Titanium Gr-2 Cryogenic Gate Valve
Titanium Gr-2 Relief Valve
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Gr. 2 | R50400 | 3.7035 |
| Grade | Ti | C | Fe | H | N | O |
| Ti Grade 2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
UNS R50400 Solenoid Instrument Valve Manifold
Titanium Gr 2 Integral-Bonnet Instrument Needle Valves
Ti Alloy Gr.2 Two piece Instrument Ball Valves
3.7035 Instrument Trunnion Ball Valves
ANSI B16.34 Titanium Gr 2 DBB Valve
Titanium Gr-2 Metering Valve Exporter
Titanium 3.7035 Instrumentation Valves Dealer
Titanium R50400 Instrumentation Valves
Titanium UNS R50400 Bellows-sealed Valves
Titanium 3.7035 Fluid Line Stop Valves
Ti Alloy Gr 2 Cryogenic Safety Relief Valves Supplier
Ti. Alloy Gr-2 O-Ring Poppet Valve
UNS R50400 3-Way Manifold Valves
Titanium Gr 2 Rising Plug Valves
Titanium Grade 2 In-Line Gauge Isolator Valves
3.7035 In-line Push-to-Read Gauge Isolator Valve
UNS R50400 Metering Valves
Titanium Gr-2 Non Return Check Valve Manufacturer
Ti Alloy Gr.2 Mini Needle Valves
Titanium Gr-2 Pendulum Valves Stockist
Titanium Grade 2 Instrumentation Valves Stockholder
Titanium Grade 2 Wellhead Bleed and Gauge Valve
Titanium Gr-2 Sequence Control Valves
ANSI Gr 2 Titanium Fluid Control Ball Float Valve
| ASME B16.34 | show the max allowed pressure for a material depending on the product rating and the process temperature (the higher the temperature, the lower the pressure at a given rating). | Grade 2 Titanium Two piece Instrument Ball Valve, Titanium Gr 2 Instrument High Pressure Ball Valve, Titanium Gr-2 Instrument Trunnion Ball Valve, Titanium Gr.2 Trunnion double block bleed Ball Valves, Titanium Grade 2 Check Diaphragm Valves, Titanium Grade 2 Angle Type Instrument Globe Valves, Bolted-Bonnet Instrument Gate Valve, Instrument Double Block Bleed Valves, Titanium Gr-2 Monoflange Butterfly Valves |
Titanium Gr 2 Instrumentation Valves
Standard : ASME B16.10, ASME B16.5, ASME B16.25, ASME B16.34
Temperature Rating : up to 201°C
End Connection : Screwed (NPT / BSPP / BSPT)
Pressure Rating : up to 2010 psi (413 bar).
Size Range : ¼" to 1”