We are the best manufacturer and supplier Inconel 600
Pipe Fittings worldwide. Astec Tubes is known for its quality
standers and we made these products with premium quality of alloys. These Inconel
600 products are known for their excellent resistance to corrosion. We provide this
Inconel 600 in many specifications for different standers such as ASTM B366/ ASME
SB366. Inconel 600 is a nickel-chromium alloy that is manufactured for its high
content nickel which provides excellent resistance to chloride. This alloy is
Cryogenic to raised temperature in the ranges of 2000 degrees.
Inconel 600 Buttweld Fittings, Inconel 2.4816 Pipe Fittings, Incoloy 600 Butt weld Reducer,
Inconel 600 Pipe Fittings, ASTM B366 Inconel 600 Pipe Fittings, UNS N06600 Pipe Fittings,
Inconel Alloy 600 Pipe Fitting, Nickel Alloy 600 Pipe Fitting, Inconel 600 Buttweld Fittings
Suppliers in Mumbai, India.
These Inconel 600 Pipe Fittings
are made with a combination of Nickel-Chromium and iron and have excellent
mechanical properties. It has excellent resistance to oxidation and found wide usage
used in the furnace and heat-treating field. These Inconel 600 Pipe Fittings can be
straightened and hardened only through cold work only, so age-hardening treatments
are not required. These also have high tensile strength, high resistivity, and
better holding strength. These pipe fittings have cryogenic strength and magnetic
properties.
Inconel N06600 Seamless Butt weld Fittings, Inconel 600 Stub End, Inconel 2.4816 Pipe Elbow,
ANSI B16.9 Inconel 600 Welded Pipe Fittings, JIS NCF 600 Pipe Bend, Inconel 600 Equal Tee,
Alloy 600 Buttweld Fitting, ASME SA B366 Alloy 600 Pipe Cap, Inconel 600 Concentric Reducer,
Inconel 600 Buttweld 90 Deg. Elbow, Inconel 600 Eccentric Reducer, Inconel 600 Industrial
Pipe Fittings Manufacturer in India.
Types of Inconel 600 Pipe
Fittings that may be used are Inconel 600 45 degrees Elbow, Pipe
fittings, Eccentric Reducer, Lateral Tee, Concentric Reducer, Short Stub End, Long Stub End,
Equal Tee, Bend, End Cap, and equal cross. This Inconel 600 is finished in Hot rolled
annealed and available in ribbon, foil, strips. Cold rolled bright annealed and cold rolling
which produces a smooth finish. There are other forms such as dull finish which also
produces by cold rolling.
There are many applications for Inconel 600 Pipe Fittings such as Seawater equipment, Power
Generation Petrochemicals, Condensers, Gas processing, Heat exchangers and pulp and paper
industry.
Accordance with EN 10204/3.1B, we provide many testing
certificates such as Raw material certificate, 100% radiography certificate and many other
third-party certificates. We also include any documentation for you, like commercial
invoice, fumigation certificate, guarantee letter, quality assurance plan.
Before we deliver our products to our clients there are many testing done on these, Inconel
600 Pipe Fittings for quality assurance. Some of these testing are mechanical testing,
hardness test, chemical analysis test, flattening test, flaring test, and intergranular
corrosion test.
Inconel 600 Butt weld Elbow
Inconel 600 Butt weld Tee
Inconel 600 Butt weld Cross
Inconel 600 Butt weld Reducer
Inconel 600 Butt weld Stub End
Inconel 600 Butt weld Pipe Bend
Inconel 600 Butt weld Fittings Equivalent Grades
| STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
| Inconel 600 |
2.4816 |
N06600 |
NCF 600 |
NA 13 |
МНЖМц 28-2,5-1,5 |
NC15FE11M |
NiCr15Fe |
Have you any question or query
General Queries While Buying Inconel 600 Pipe Fittings
ASTM B366 Inconel 600 Butt weld Pipe Fittings
Chemical Composition
| Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
| Inconel 600 |
0.15 max |
1.00 max |
0.50 max |
0.015max |
0.50 max |
6.00 – 10.00 |
72.00 min |
14.00 – 17.00 |
ANSI B16.9 Inconel 600 Buttweld Fittigns Mechanical
Properties
| Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| Inconel 600 |
8.47 g/cm3 |
1413 °C (2580 °F) |
Psi – 95,000 , MPa – 655 |
Psi – 45,000 , MPa – 310 |
40 % |
Types of Inconel 600 Buttweld Fittings
UNS N06600 Buttweld Elbow
Inconel 600 Pipe Elbow
Inconel Alloy 600 Equal Tee
Inconel 2.4816 Butt weld Cross
ANSI B16.9 Inconel 600 Welded Elbow
Inconel 600 Reducer Exporter
Inconel 2.4816 Pipe Fittings
Inconel N06600 Pipe Fittings
UNS N06600 Eccentric Reducer
Inconel 2.4816 Concentric Reducer
Inconel 600 Pipe Cap Supplier
JIS NCF 600 Buttweld End Cap
UNS N06600 Butt weld Fittings
Inconel 600 Long Stub End
ASME SB 366 Alloy 600 Buttweld Bend
2.4816 Butt weld Fittings
UNS N06600 Pipe Fittings
Alloy 600 Short Stub End Manufacturer
Inconel 600 Pipe Bend
Inconel 600 90 deg. Elbow Stockist
JIS NCF 600 Pipe Fittings Stockholder
ASTM B366 Inconel 600 Welded Fittings
Inconel 600 Seamless Fittings
ANSI 600 Inconel Pipe Fittings
Manufacturing Standards of Inconel 600 Pipe Fittings
Manufacturers in India & Globally
| ASME B16.9 |
Factory-Made Wrought Buttwelding Fittings |
Inconel 600 Long Radius Elbows, Long Radius Reducing Elbows, Alloy 600 Long
Radius Returns, Alloy 600 Short Radius Elbows, Inconel 600 Short Radius
180-deg Rerurns, Inconel 600 3D elbows, Straight Tees, Straight Crosses,
Reducing Outlet Tees, Reducing Outlet Crosses, Inconel 600 Lap Joint Stub
Ends, Inconel 600 Caps, Reducers |
| ASME B16.28 |
|
Inconel 600 Short Radius Elbows, Inconel 600 Short Radius 180-deg Returns
|
| MSS SP43 |
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion
Resistant Applications |
Inconel 600 Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees,
Lap Joint Stub ends, 600 Inconel 600 caps, long radius 180 Degree returns,
concentric reducers, eccentric reducers |
| Mss SP75 |
|
Inconel 600 Long Radius Elbows, 3R elbows, straight tees, reducing outlet
tees, caps, 600 Inconel reducers |
Inconel 600 Buttweld Fittings Applications
- Petrochemicals
- Gas Processing
- Chemical Equipment
- Off-Shore Oil Drilling Companies
- Pharmaceutical Equipment
- Pulp & Paper Industry
- Sea Water Equipment
- Power Generation
ASTM B366 Inconel 600 Pipe Fittings
Standard :ASTM B366 / ASME SB366
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom